IAB Interactive Standardized Equipment List   return to main tree

Search Interactive SEL:




Last Updated: 7/8/2022 12:27:34 PM

Previous SEL Number: 01AR-06-REUS

Description: Respirator certified by NIOSH

National Institute for Occupational Safety and Health

under 42 CFR

Code of Federal Regulations

84, consisting of a tight-fitting elastomeric facepiece (capable of being decontaminated and reused) and particulate filtration media (cartridges, canisters) certified by NIOSH

National Institute for Occupational Safety and Health

under 42 CFR

Code of Federal Regulations

84 with a filter efficiency of N100, R100, or P100 (see 01AR-06-FLTR). Available both with and without exhalation valves.

ImportantFeatures: Manufactured in a variety of shapes and sizes. The filtering facepiece respirator shall have a four-point suspension system and elastomeric seal.
The filters are certified to three categories of oil resistance, as indicated by the letter prefix (N=Not Resistant to Oil, R=Somewhat Resistant to Oil (limited to one work shift), P=Strongly Resistant to Oil).

Filtering facepiece respirators certified to N, R, or P100 have a filter efficiency of at least 99.97% of airborne particles.

Operating Considerations: These respirators are considered ""tight-fitting"" and therefore fit testing is required under 29 CFR

Code of Federal Regulations

1910.134.

Particulate respirators are known as air-purifying respirators because they protect by filtering particles out of the air as you breathe. These respirators protect only against particles, not gases or vapors. Therefore, they are not effective for use in chemical, firefighting or fire escape applications. These respirators are not suitable for use in IDLH or oxygen-deficient environments. However, since respirable dusts and airborne biological agents such as bacteria or viruses are particles, they can be filtered by particulate respirators.

Respirator type should be chosen based upon the anticipated hazard and wearer activity. For example, ""N"" respirators would be well suited for the medical/airborne pathogen environment, while ""P"" respirators would be more applicable for industrial settings where aerosolized oils are present.

NIOSH-approved filtering facepiece respirators exist with other efficiencies (such as N-95); however, it is recommended to use the highest efficiency tested under 42 CFR

Code of Federal Regulations

part 84 in order to reduce the potential contaminant concentration inside the facepiece to the lowest possible level.

Training Requirements: Core Training: OSHA 1910.120, OSHA 1910.134, Manufacturer's User Instructions.
Initial Training: Minimal (<1 day)
Sustainment Training: Minimal (<1 day)

Mandatory Standards:

42 CFR 84 (NIOSH), Approval of Respiratory Protective Devices

Applicable Standards and References:

29 CFR 1910. 120 (OSHA), Hazardous Waste Operations and Emergency Response

29 CFR 1910. 134 (OSHA), Respiratory Protection

CAN/CGSB/CSA-Z1610-11 (R2021), Protection of First Responders from Chemical, Biological, Radiological, and Nuclear (CBRN) Events

NFPA 1404: Standard for Fire Service Respiratory Protection Training, 2018 Edition (planned for incorporation into NFPA 1400)

MSSL:

Responder Safety: Infectious Diseases

HazMat: Response Team

Forensic Technician

Law Enforcement: K-9

Maritime

Law Enforcement Mobile Field Force

Medical Point of Dispensing

Mortuary Operations

REL: Full Canadian Recommended Equipment List

REL: LOS-1, Multi-Agency Intervention

REL: LOS-2, Scout/Reconnaissance Mission

REL: LOS-4, Evac and Perimeter Control